This is my test site for moodle. I intend to make a list of courses here which will link into Units of Competence .

COURSES:

CERTIFICATE II IN ELECTROTECHNOLOGY 

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRICAL SYSTEMS)

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRONIC SYSTEMS)

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRICAL DRAFTING)

CERTIFICATE III IN ELECTROTECHNOLOGY (INSTRUMENTATION & CONTROL)

 The outline of the course in layout view can be seen here.

 The units of competence are as follows:

  If you click on the Unit of Competence it will link you to the Moodle site which contains the course (only one at this time -  SIN 51190)).

Core Group 1 Planning a Career

TAFEWA SIN 51188 Draft Unit: UEENEEE038A Participate in development and follow a personal competency development plan - 20hrs

Core Group 2 Electrical Mathematics

TAFEWA SIN 51189 Draft Unit: UEENEEE026A  Provide computational solutions to basic engineering problems - 40hrs

Core Group 3 DC Electrical Fundamentals

TAFEWA SIN 51190 Draft Unit : UEENEEE003A Solve problems in extra-low voltage single path circuits - 30hrs

TAFEWA SIN 51191 Draft Unit: UEENEEE004A  Solve problems in multiple path d.c. circuits - 30hrs

Core Group 4 Digital Techniques

TAFEWA SIN 51192 Draft Unit: UEENEEH012A Solve problems in digital components of electronic apparatus - 60hrs

Core Group 5 PC Systems Support

TAFEWA SIN 51193 Draft Unit: UEENEED002A Assemble, set-up and test personal computers - 20hrs

TAFEWA SIN 51194 Draft Unit: UEENEED012A Support computers hardware and software - 60hrs

TAFEWA SIN 51195 Draft Unit: UEENEED043A Install and configure a computer operating system and software - 20hrs

Core Group 6 Electronic Workshop Practices

TAFEWA SIN 51197 Draft Unit: UEENEEA002A Select electronic components - 5hrs

TAFEWA SIN 51198 Draft Unit: UEENEEH002A Carry out basic repairs to electronic apparatus by replacement of components - 30hrs

TAFEWA SIN 51199 Draft Unit: UEENEEE002A Dismantle, assemble and fabricate Electrotechnology components - 30hrs

TAFEWA SIN 51200 Draft Unit: UEENEEE005A Fix and secure equipment - 5hrs

TAFEWA SIN 51201 Draft Unit: UEENEEE007A Use drawings, diagrams, schedules and manuals - 10hrs

Core Group 7 Industry Practices

TAFEWA SIN 51203 Draft Unit: UEENEEC001A Maintain documentation - 5hrs

TAFEWA SIN 51204 Draft Unit: UEENEEC010A Deliver a service to customers - 10hrs 

TAFEWA SIN 51205 Draft Unit: UEENEEE001A Apply OHS practices in the workplace - 10hrs

TAFEWA SIN 51206  Draft Unit: UEENEEE034A Document occupational hazards and risks in electronic - 5hrs

TAFEWA SIN 51207 Draft Unit:  UEENEED001A Use basic computer applications relevant to a workplace  - 30hrs

Reach this area by clicking Content (menu bar)-Content by section-event log-event log items- then click "log" and "edit". I put these comments throughout the site as it reminds me what to do if I haven't edited the site for sometime. 

   1.      29/8/2006 - Purchased a domain site from www.siteground.com for USD118.8. Site is called
            www.tafeopenlearning.com and is for 2 years. Very pleased so far. Only a development site.
   2.      29/8/2006 - Installed Moodle to site from Siteground. www.tafeopenlearning.com/moodle/
   3.      29/8/2006 - Installed Joomla to site from Siteground. www.tafeopenlearning.com/Joomla/.
           This was an error - see below - should have made Joomla my home page when installing.
   4.      12/9/2006 - Purchased a Joomla template - from www.joomla-templates.com. Cost 23 Euros -
           called "action wine" - must have needed a glass of red at the time. Happy with the template.
   5.      17/9/2006 - Installed JCE wysiwyg editor (http://www.cellardoor.za.net/) thinking it could
           fix the background colour but didn't. Wrote to joomla-templates and very prompt reply telling
           me to click on: - Mambots - change "Template CSS Classes" to No and in "Custom CSS Classes" 
           enter "css". Fixed the background problem and I ended up with the JCE HTML editor which looks
           good. Easy to install - has a tutorial on how to do it. Just download the JCE Components and
           JCE Core Mambot and intall them both. Has more features than the "tinyWYSIWYG" html editor
           which comes with Joomla - very table oriented.
   6.      20/9/06 - Had a problem with linking to Moodle because I had not made Joomla my home page.
           After logging in to Moodle as a guest etc. it reverted back to Joomla as I had diverted my
           home page to Joomla. I posted a "Ticket" with Siteground late evening (you get seven a year
           apparently - I presume you pay for them after 7) to make Joomla my homepage which was done
           the next morning - good service.
   7.      20/9/2006 - Installed Event Calendar - http://forge.joomla.org/sf/projects/eventcal
   8.      30/9/06 - Installed a WebCam to see how easy it is. Pretty easy as it turns out.
           Used the program Fwink from http://lundie.ca/fwink/ . Looks a good program. Needed to  put
           in the settings for the FTP server - that was my sitegroundxxx.com (where xxx is your allocated
           number) and your user name and password you use with siteground. Also need to point to a
           directory. I used www/images/ which I then picked up the webcam.jpg photo in Joomla as a URL
           (http://www.tafeopenlearning.com//images/webcam.jpg) from a menu item on the main menu.
           Eventually will try to replace the WebCam camera with a surveillance camera where I can
           check the front door etc. when I am away.
   9.      1/10/06 - Had a problem trying to edit this, or any,  content. The editor would not allow
           links or you could not look at the html code, insert symbols etc. The solution is to make sure
           when you access your domain you use www, e.g. http:www.yourdomain.com/administator/.
           Having the domain prefixed with www is essential.
           Don't use http://yourdomain.com/administator/ without the www. It will still access the
           site etc. but will create problems.
           For example the address for the character map in the editor is located at the following address:
           http://www.tafeopenlearning.com//mambots/editors/jce/jscripts/tiny_mce/themes/advanced/charmap.htm
           If you have the wrong address logged in, i.e http://yourdomain.com/ without the www it
           cannot find the character map and so on for links, html etc.  I made some changes to the
            character map to give more Greek Characters etc.

  10.     3/10/06 - Installed the Mambot WikiBot from http://www.theinevitabledossier.com/wikibot.html
            Works well. E.g. hold your cursor over Western Australia then (click) in the welcome page and
             it will take you to Wikipedia

11.      General - I found the following from a FAQ useful. It was in response to a question on Sections
           and Categories - You can decide what type of content you'll use. The basic things don't change:
           You need a content section and some content categories under each section. E.g., you want
           to publish some short stories on your site. Go to the section manager and create a new
           section called, for example, "Fiction". Then, if you plan to publish different types of
           stories, go to the categories manager, select the new section you just created on the
           dropdown list ("Fiction") and create some categories like "Science-fiction", "Thriller",
           "Romance"... When you want to add a new thriller story to your site, just select
           content->fiction and click "New". While inputting the stuff, choose the
           category "Thriller" from the dropdown list.       
           Maybe you would also like a solid link to your newly created section. Go to menu manager,
           select "main menu" and add a menu item called (like in our example) "Fiction".
           Choose "List - Content section" and then, "Fiction". When you saved it
          (don't forget to select "published" option) a new menu item will appear on your main menu called
          "Fiction". Click on it, you'll see the list of categories you created: Science-fiction, Thriller,
           Romance... Select a category and all the items entered under this category will be listed.
           Click one of the items and read it.
           You may also want the newly entered items to appear on the frontpage.
           Just select "show on frontpage" box on content item screen, and the new items will appear
           with their headlines and intro paragraphs on the frontpage, with a link just below them which
           reads "continue.." If a visitor would like to read the rest, he/she can click on this link.
           When entering the articles, news or other content items, use the double text boxes to define
           the intro part and the rest.
           Not everything on a web site need to be dynamic. You'll probably also need some static pages,
           like "About our company" or "My Biography", or "Privacy Policy" or... so on... You can create
           some static pages with Mambo, using the "Static content Manager". Just click "New"
           and design your page. If you want to, you can also add a link to it on one of your menus.

This is my test site for moodle. I intend to make a list of courses here which will link into Units of Competence . Reach this with Content (menu bar) - Content by section - Courses Items - Click on Course and Edit.

COURSES:

NAVY SysCom  Course

CERTIFICATE II IN ELECTROTECHNOLOGY 

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRICAL SYSTEMS)

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRONIC SYSTEMS)

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRICAL DRAFTING)

CERTIFICATE III IN ELECTROTECHNOLOGY (INSTRUMENTATION & CONTROL)

 The outline of the course in layout view can be seen here.

 The units of competence are as follows:

  If you click on the Unit of Competence it will link you to the Moodle site which contains the course (only one at this time -  SIN 51190)).

Core Group 1 Planning a Career

TAFEWA SIN 51188 Draft Unit: UEENEEE038A Participate in development and follow a personal competency development plan - 20hrs

Core Group 2 Electrical Mathematics

TAFEWA SIN 51189 Draft Unit: UEENEEE026A  Provide computational solutions to basic engineering problems - 40hrs

Core Group 3 DC Electrical Fundamentals

TAFEWA SIN 51190 Draft Unit : UEENEEE003A Solve problems in extra-low voltage single path circuits - 30hrs

TAFEWA SIN 51191 Draft Unit: UEENEEE004A  Solve problems in multiple path d.c. circuits - 30hrs

Core Group 4 Digital Techniques

TAFEWA SIN 51192 Draft Unit: UEENEEH012A Solve problems in digital components of electronic apparatus - 60hrs

Core Group 5 PC Systems Support

TAFEWA SIN 51193 Draft Unit: UEENEED002A Assemble, set-up and test personal computers - 20hrs

TAFEWA SIN 51194 Draft Unit: UEENEED012A Support computers hardware and software - 60hrs

TAFEWA SIN 51195 Draft Unit: UEENEED043A Install and configure a computer operating system and software - 20hrs

Core Group 6 Electronic Workshop Practices

TAFEWA SIN 51197 Draft Unit: UEENEEA002A Select electronic components - 5hrs

TAFEWA SIN 51198 Draft Unit: UEENEEH002A Carry out basic repairs to electronic apparatus by replacement of components - 30hrs

TAFEWA SIN 51199 Draft Unit: UEENEEE002A Dismantle, assemble and fabricate Electrotechnology components - 30hrs

TAFEWA SIN 51200 Draft Unit: UEENEEE005A Fix and secure equipment - 5hrs

TAFEWA SIN 51201 Draft Unit: UEENEEE007A Use drawings, diagrams, schedules and manuals - 10hrs

Core Group 7 Industry Practices

TAFEWA SIN 51203 Draft Unit: UEENEEC001A Maintain documentation - 5hrs

TAFEWA SIN 51204 Draft Unit: UEENEEC010A Deliver a service to customers - 10hrs 

TAFEWA SIN 51205 Draft Unit: UEENEEE001A Apply OHS practices in the workplace - 10hrs

TAFEWA SIN 51206  Draft Unit: UEENEEE034A Document occupational hazards and risks in electronic - 5hrs

TAFEWA SIN 51207 Draft Unit:  UEENEED001A Use basic computer applications relevant to a workplace  - 30hrs

 The outline of the course in layout view can be seen here.

 The units of competence are as follows:

  If you click on the Unit of Competence it will link you to the Moodle site which contains the course (only one at this time -  SIN 51190)).

Core Group 1 Planning a Career

TAFEWA SIN 51188 Draft Unit: UEENEEE038A Participate in development and follow a personal competency development plan - 20hrs

Core Group 2 Electrical Mathematics

TAFEWA SIN 51189 Draft Unit: UEENEEE026A  Provide computational solutions to basic engineering problems - 40hrs

Core Group 3 DC Electrical Fundamentals

TAFEWA SIN 51190 Draft Unit : UEENEEE003A Solve problems in extra-low voltage single path circuits - 30hrs

TAFEWA SIN 51191 Draft Unit: UEENEEE004A  Solve problems in multiple path d.c. circuits - 30hrs

Core Group 4 Digital Techniques

TAFEWA SIN 51192 Draft Unit: UEENEEH012A Solve problems in digital components of electronic apparatus - 60hrs

Core Group 5 PC Systems Support

TAFEWA SIN 51193 Draft Unit: UEENEED002A Assemble, set-up and test personal computers - 20hrs

TAFEWA SIN 51194 Draft Unit: UEENEED012A Support computers hardware and software - 60hrs

TAFEWA SIN 51195 Draft Unit: UEENEED043A Install and configure a computer operating system and software - 20hrs

Core Group 6 Electronic Workshop Practices

TAFEWA SIN 51197 Draft Unit: UEENEEA002A Select electronic components - 5hrs

TAFEWA SIN 51198 Draft Unit: UEENEEH002A Carry out basic repairs to electronic apparatus by replacement of components - 30hrs

TAFEWA SIN 51199 Draft Unit: UEENEEE002A Dismantle, assemble and fabricate Electrotechnology components - 30hrs

TAFEWA SIN 51200 Draft Unit: UEENEEE005A Fix and secure equipment - 5hrs

TAFEWA SIN 51201 Draft Unit: UEENEEE007A Use drawings, diagrams, schedules and manuals - 10hrs

Core Group 7 Industry Practices

TAFEWA SIN 51203 Draft Unit: UEENEEC001A Maintain documentation - 5hrs

TAFEWA SIN 51204 Draft Unit: UEENEEC010A Deliver a service to customers - 10hrs 

TAFEWA SIN 51205 Draft Unit: UEENEEE001A Apply OHS practices in the workplace - 10hrs

TAFEWA SIN 51206  Draft Unit: UEENEEE034A Document occupational hazards and risks in electronic - 5hrs

TAFEWA SIN 51207 Draft Unit:  UEENEED001A Use basic computer applications relevant to a workplace  - 30hrs

Core Group 8 AC Electrical Fundamentals

TAFEWA SIN 51208 Draft Unit: UEENEED004A Use engineering applications software - 20hrs

TAFEWA SIN 51209 Draft Unit: UEENEEH014A Solve problems in frequency dependent circuits - 60hrs

Core Group 9 Microprocessor Fundamentals

TAFEWA SIN 51210 Draft Unit: UEENEEH015A Solve problems in microprocessor based hardware and firmware - 30hrs

TAFEWA SIN 51212 Draft Unit: UEENEEH066A Fault find Microcontroller based hardware - 30hrs

Core Group 10 DC Power Supplies

TAFEWA SIN 51213 Draft Unit:  UEENEEH011A  Solve problems in D.C. power supplies with single phase inputs - 30hrs

TAFEWA SIN 51214 Draft Unit:  UEENEEH038A Find and repair faults in complex power supplies - 30hrs

Core Group 11 Enterprise Development

TAFEWA SIN 51215 Perform Work Typical of an Electrotechnology environment - 20hrs

Elective Group 1 Basic Amplifiers

TAFEWA SIN 51216 Draft Unit: UEENEEH013A  Solve problems in amplifier sections of electronic apparatus - 40hrs

TAFEWA SIN 51217 Draft Unit:  UEENEEH039A Solve problems in basic amplifier circuits - 20hrs

Elective Group 2 Data Communications

TAFEWA SIN 51218 Draft Unit: NEW  Support Data Communications Systems - 40hrs

CERTIFICATE III IN ELECTROTECHNOLOGY (ELECTRONIC SYSTEMS)

 The outline of the course in layout view can be seen here.

 The units of competence are as follows:

  If you click on the Unit of Competence it will link you to the Moodle site which contains the course (only one at this time -  SIN 51190)).

Core Group 1 Planning a Career

TAFEWA SIN 51188 Draft Unit: UEENEEE038A Participate in development and follow a personal competency development plan - 20hrs

Core Group 2 Electrical Mathematics

TAFEWA SIN 51189 Draft Unit: UEENEEE026A  Provide computational solutions to basic engineering problems - 40hrs

Core Group 3 DC Electrical Fundamentals

TAFEWA SIN 51190 Draft Unit : UEENEEE003A Solve problems in extra-low voltage single path circuits - 30hrs

TAFEWA SIN 51191 Draft Unit: UEENEEE004A  Solve problems in multiple path d.c. circuits - 30hrs

Core Group 4 Digital Techniques

TAFEWA SIN 51192 Draft Unit: UEENEEH012A Solve problems in digital components of electronic apparatus - 60hrs

Core Group 5 PC Systems Support

TAFEWA SIN 51193 Draft Unit: UEENEED002A Assemble, set-up and test personal computers - 20hrs

TAFEWA SIN 51194 Draft Unit: UEENEED012A Support computers hardware and software - 60hrs

TAFEWA SIN 51195 Draft Unit: UEENEED043A Install and configure a computer operating system and software - 20hrs

Core Group 6 Electronic Workshop Practices

TAFEWA SIN 51197 Draft Unit: UEENEEA002A Select electronic components - 5hrs

TAFEWA SIN 51198 Draft Unit: UEENEEH002A Carry out basic repairs to electronic apparatus by replacement of components - 30hrs

TAFEWA SIN 51199 Draft Unit: UEENEEE002A Dismantle, assemble and fabricate Electrotechnology components - 30hrs

TAFEWA SIN 51200 Draft Unit: UEENEEE005A Fix and secure equipment - 5hrs

TAFEWA SIN 51201 Draft Unit: UEENEEE007A Use drawings, diagrams, schedules and manuals - 10hrs

Core Group 7 Industry Practices

TAFEWA SIN 51203 Draft Unit: UEENEEC001A Maintain documentation - 5hrs

TAFEWA SIN 51204 Draft Unit: UEENEEC010A Deliver a service to customers - 10hrs 

TAFEWA SIN 51205 Draft Unit: UEENEEE001A Apply OHS practices in the workplace - 10hrs

TAFEWA SIN 51206  Draft Unit: UEENEEE034A Document occupational hazards and risks in electronic - 5hrs

TAFEWA SIN 51207 Draft Unit:  UEENEED001A Use basic computer applications relevant to a workplace  - 30hrs

Core Group 8 AC Electrical Fundamentals

TAFEWA SIN 51208 Draft Unit: UEENEED004A Use engineering applications software - 20hrs

TAFEWA SIN 51209 Draft Unit: UEENEEH014A Solve problems in frequency dependent circuits - 60hrs

Core Group 9 Microprocessor Fundamentals

TAFEWA SIN 51210 Draft Unit: UEENEEH015A Solve problems in microprocessor based hardware and firmware - 30hrs

TAFEWA SIN 51212 Draft Unit: UEENEEH066A Fault find Microcontroller based hardware - 30hrs

Core Group 10 DC Power Supplies

TAFEWA SIN 51213 Draft Unit:  UEENEEH011A  Solve problems in D.C. power supplies with single phase inputs - 30hrs

TAFEWA SIN 51214 Draft Unit:  UEENEEH038A Find and repair faults in complex power supplies - 30hrs

Core Group 11 Enterprise Development

TAFEWA SIN 51215 Perform Work Typical of an Electrotechnology environment - 20hrs

Elective Group 1 Basic Amplifiers

TAFEWA SIN 51216 Draft Unit: UEENEEH013A  Solve problems in amplifier sections of electronic apparatus - 40hrs

TAFEWA SIN 51217 Draft Unit:  UEENEEH039A Solve problems in basic amplifier circuits - 20hrs

Elective Group 2 Data Communications

TAFEWA SIN 51218 Draft Unit: NEW  Support Data Communications Systems - 40hrs

 The outline of the course in layout view can be seen here.

 The units of competence are as follows:

  If you click on the Unit of Competence it will link you to the Moodle site which contains the course (only one at this time -  SIN 51190)).

Core Group 1 Planning a Career

TAFEWA SIN 51188 Draft Unit: UEENEEE038A Participate in development and follow a personal competency development plan - 20hrs

Core Group 2 Electrical Mathematics

TAFEWA SIN 51189 Draft Unit: UEENEEE026A  Provide computational solutions to basic engineering problems - 40hrs

Core Group 3 DC Electrical Fundamentals

TAFEWA SIN 51190 Draft Unit : UEENEEE003A Solve problems in extra-low voltage single path circuits - 30hrs

TAFEWA SIN 51191 Draft Unit: UEENEEE004A  Solve problems in multiple path d.c. circuits - 30hrs

Core Group 4 Digital Techniques

TAFEWA SIN 51192 Draft Unit: UEENEEH012A Solve problems in digital components of electronic apparatus - 60hrs

Core Group 5 PC Systems Support

TAFEWA SIN 51193 Draft Unit: UEENEED002A Assemble, set-up and test personal computers - 20hrs

TAFEWA SIN 51194 Draft Unit: UEENEED012A Support computers hardware and software - 60hrs

TAFEWA SIN 51195 Draft Unit: UEENEED043A Install and configure a computer operating system and software - 20hrs

Core Group 6 Electronic Workshop Practices

TAFEWA SIN 51197 Draft Unit: UEENEEA002A Select electronic components - 5hrs

TAFEWA SIN 51198 Draft Unit: UEENEEH002A Carry out basic repairs to electronic apparatus by replacement of components - 30hrs

TAFEWA SIN 51199 Draft Unit: UEENEEE002A Dismantle, assemble and fabricate Electrotechnology components - 30hrs

TAFEWA SIN 51200 Draft Unit: UEENEEE005A Fix and secure equipment - 5hrs

TAFEWA SIN 51201 Draft Unit: UEENEEE007A Use drawings, diagrams, schedules and manuals - 10hrs

Core Group 7 Industry Practices

TAFEWA SIN 51203 Draft Unit: UEENEEC001A Maintain documentation - 5hrs

TAFEWA SIN 51204 Draft Unit: UEENEEC010A Deliver a service to customers - 10hrs 

TAFEWA SIN 51205 Draft Unit: UEENEEE001A Apply OHS practices in the workplace - 10hrs

TAFEWA SIN 51206  Draft Unit: UEENEEE034A Document occupational hazards and risks in electronic - 5hrs

TAFEWA SIN 51207 Draft Unit:  UEENEED001A Use basic computer applications relevant to a workplace  - 30hrs

Core Group 8 AC Electrical Fundamentals

TAFEWA SIN 51208 Draft Unit: UEENEED004A Use engineering applications software - 20hrs

TAFEWA SIN 51209 Draft Unit: UEENEEH014A Solve problems in frequency dependent circuits - 60hrs

Core Group 9 Microprocessor Fundamentals

TAFEWA SIN 51210 Draft Unit: UEENEEH015A Solve problems in microprocessor based hardware and firmware - 30hrs

TAFEWA SIN 51212 Draft Unit: UEENEEH066A Fault find Microcontroller based hardware - 30hrs

Core Group 10 DC Power Supplies

TAFEWA SIN 51213 Draft Unit:  UEENEEH011A  Solve problems in D.C. power supplies with single phase inputs - 30hrs

TAFEWA SIN 51214 Draft Unit:  UEENEEH038A Find and repair faults in complex power supplies - 30hrs

Core Group 11 Enterprise Development

TAFEWA SIN 51215 Perform Work Typical of an Electrotechnology environment - 20hrs

Elective Group 1 Drafting Practices 1

TAFEWA SIN 51233 Organize and communicate information - 18hrs

TAFEWA SIN 51234 Interpret technical drawing - 36hrs

Elective Group 2 Drafting Practices 2

TAFEWA SIN 51235 Use computer aided drafting systems to produce basic engineering drawings - 40hrs

TAFEWA SIN 51236 Produce basic engineering graphics - 20hrs

 The outline of the course in layout view can be seen here.

 The units of competence are as follows:

  If you click on the Unit of Competence it will link you to the Moodle site which contains the course (only one at this time -  SIN 51190)).

Core Group 1 Planning a Career

TAFEWA SIN 51188 Draft Unit: UEENEEE038A Participate in development and follow a personal competency development plan - 20hrs

Core Group 2 Electrical Mathematics

TAFEWA SIN 51189 Draft Unit: UEENEEE026A  Provide computational solutions to basic engineering problems - 40hrs

Core Group 3 DC Electrical Fundamentals

TAFEWA SIN 51190 Draft Unit : UEENEEE003A Solve problems in extra-low voltage single path circuits - 30hrs

TAFEWA SIN 51191 Draft Unit: UEENEEE004A  Solve problems in multiple path d.c. circuits - 30hrs

Core Group 4 Digital Techniques

TAFEWA SIN 51192 Draft Unit: UEENEEH012A Solve problems in digital components of electronic apparatus - 60hrs

Core Group 5 PC Systems Support

TAFEWA SIN 51193 Draft Unit: UEENEED002A Assemble, set-up and test personal computers - 20hrs

TAFEWA SIN 51194 Draft Unit: UEENEED012A Support computers hardware and software - 60hrs

TAFEWA SIN 51195 Draft Unit: UEENEED043A Install and configure a computer operating system and software - 20hrs

Core Group 6 Electronic Workshop Practices

TAFEWA SIN 51197 Draft Unit: UEENEEA002A Select electronic components - 5hrs

TAFEWA SIN 51198 Draft Unit: UEENEEH002A Carry out basic repairs to electronic apparatus by replacement of components - 30hrs

TAFEWA SIN 51199 Draft Unit: UEENEEE002A Dismantle, assemble and fabricate Electrotechnology components - 30hrs

TAFEWA SIN 51200 Draft Unit: UEENEEE005A Fix and secure equipment - 5hrs

TAFEWA SIN 51201 Draft Unit: UEENEEE007A Use drawings, diagrams, schedules and manuals - 10hrs

Core Group 7 Industry Practices

TAFEWA SIN 51203 Draft Unit: UEENEEC001A Maintain documentation - 5hrs

TAFEWA SIN 51204 Draft Unit: UEENEEC010A Deliver a service to customers - 10hrs 

TAFEWA SIN 51205 Draft Unit: UEENEEE001A Apply OHS practices in the workplace - 10hrs

TAFEWA SIN 51206  Draft Unit: UEENEEE034A Document occupational hazards and risks in electronic - 5hrs

TAFEWA SIN 51207 Draft Unit:  UEENEED001A Use basic computer applications relevant to a workplace  - 30hrs

Core Group 8 AC Electrical Fundamentals

TAFEWA SIN 51208 Draft Unit: UEENEED004A Use engineering applications software - 20hrs

TAFEWA SIN 51209 Draft Unit: UEENEEH014A Solve problems in frequency dependent circuits - 60hrs

Core Group 9 Microprocessor Fundamentals

TAFEWA SIN 51210 Draft Unit: UEENEEH015A Solve problems in microprocessor based hardware and firmware - 30hrs

TAFEWA SIN 51212 Draft Unit: UEENEEH066A Fault find Microcontroller based hardware - 30hrs

Core Group 10 DC Power Supplies

TAFEWA SIN 51213 Draft Unit:  UEENEEH011A  Solve problems in D.C. power supplies with single phase inputs - 30hrs

TAFEWA SIN 51214 Draft Unit:  UEENEEH038A Find and repair faults in complex power supplies - 30hrs

Core Group 11 Enterprise Development

TAFEWA SIN 51215 Perform Work Typical of an Electrotechnology environment - 20hrs

Elective Group 1 Industrial Measurement Systems

TAFEWA SIN 51221 Draft Unit: UEENEEI002A  Solve problems in pressure measurement systems - 10hrs

TAFEWA SIN 51222 Draft Unit:  UEENEEI003A Solve problems in density/level measurement systems - 10hrs

TAFEWA SIN 51223 Draft Unit:  UEENEEI004A Solve problems in flow measurement systems - 10hrs

TAFEWA SIN 51224 Draft Unit:  UEENEEI005A Solve problems in temperature measurement systems - 10hrs

TAFEWA SIN 51225 Draft Unit:  UEENEEI006A Solve problems in process controllers, transmitters and converters - 20hrs

Elective Group 2 Systems Installation

TAFEWA SIN 51226 Draft Unit: UEENEEI001A Install and set up transducers and sensing devices - 10hrs

TAFEWA SIN 51227 Draft Unit: UEENEEI008A  Install process control apparatus and associated equipment - 10hrs

TAFESIN 51228 Draft Unit: UEENEEI009A  Set up process measuring and control instruments - 20hrs

This is a development site put together by Ian Moore of  Perth, Western Australia, to try to get a handle on the development of a website using Joomla a Content Management System (CMS) and linking to  Moodle is an open source, e-learning platform (also known as a Course Management System (CMS) or Virtual Learning Environment (VLE)). Both these open source programs written in PHP. If you click on the item in the main menu - Event Log - you can follow my progress. It is not connected in any way with an Australian TAFE College and I will change the domain name if this exercise ever progresses to a commercial level.

Over the forthcoming months I will endeavour to develop one or two Units of Competence to some detail using Moodle, plus use this site as a repository of useful links into VTE relevant sites, products, courses etc. If you click on the item in the main menu -  Moodle - and login as a guest you can follow my progress on the first Unit of Competence.